4 Benefits of Using CNC Lathe for Better Results

CNC Lathe is one of the most common methods with sophisticated and high-end cutting possible, you can find its application in many different structures.

In this article, you’ll discover what is CNC Lathe, how it could be applied, and what TDB Tech can do for you with the CNC Lathe service.

What is CNC Lathe Technology?

CNC (Computer Numerical Control) machining is a process of manufacturing a part by the removal of material by a cutting tool. Normally, these tools are under automated control as opposed to manual control by a machinist.

A significant function of a lathe machine is removing the undesired material from a rotating workpiece with a cutting tool, which is fed against the work either transversely or lengthways to give its desired shape and size.

More than that, lathe technology can be used not only in turning (as taper turning, and shoulder turning) but also in a large variety of operations; such as facing, thread cutting, parting, chamfering reaming operations, etc.

A CNC lathe will be put on a stationary cutting tool to spin the workpiece. It is worth mentioning that many variants of these tools exist in the same machine, with some performing the functions of a lathe. The number of degrees of freedom is also the signal to classify the type of CNC machine.

For example, a 3-axis CNC machine can move the tool back and forth on the XY plane, as well as up along the z-axis. 

For more information, see our guide on the CNC Machining Services in Vietnam

CNC Lathe Parts 

Not all CNC lathes own as same part design as each other, they may have a bit different. However, most CNC lathe consists of the following elemental parts: 

• Main spindle 
• Machine bed 
• Sub-spindle
• Guideway 
• Chuck 
• Tailstock 
• Headstock 
• Monitor 
• Tool turret 
• Drive motor 
• Carriage 
• Control panel 

These parts will frequently appear in case you plan to use or buy a CNC lathe. The more you understand how these parts work, the easier it will be for you to troubleshoot any problems that may appear when you operate the machine. 

Primary benefits of CNC Lathe 

As TDB mentioned above, CNC turning, or lathing is a common technique for producing cylindrical components. However, contemporary multi-axis CNC turning centers, fitted with CNC milling tools, can now fabricate non-cylindrical parts as well. 

Therefore, CNC lathe machines might protect your projects against losses, and benefit your business in a variety of ways. 

Here are a few further benefits of using a CNC lathe machine you might need to know:

Precision and Automation

Unlike the natural variations that happen when using manual manufacturing methods, CNC Lathe can produce precise parts. CNC lathes can operate continuously without the need for constant manual intervention, increasing productivity and efficiency.

Moreover, CNC Lathe is able to update automatically, including the latest and greatest technological advancements. While the CNC lathe was set up to work continuously to meet deadlines, manual production methods run by workers will need time for them to take continual breaks.

In terms of CNC lathes, they will need to stop only on occasional maintenance services.

Flexibility

CNC lathe machines are highly accurate and can produce many types of parts with tight tolerances and precise dimensions. All of them are resulting in consistent quality and reduced scrap.

CNC lathes can be programmed to produce a wide range of complex parts with practically any size or shape. Accepts precise specification and design information from software programs. 

Consistency, Safety, and Economical

CNC lathes can repeat the same operation multiple times, resulting in consistent part quality and reduced variability. Besides, they can eliminate troublesome often correlated with manual machining, including employee illness, vacation time, and staffing shortages. 

CNC lathes are designed with safety features to protect operators from hazards such as flying debris and rotating parts. The CNC machine operators will be safe from any sharp parts since they can see machine tools without direct contact but via glass. They can avoid the spindle or lathe or come near the cooling fluids. 

Thanks to the two factors above, CNC Lathe needs less labor to operate. Fewer workers, less salary need to pay. 

So, If you’ve been looking for ways to skyrocket production while reducing your costs and risks of error, a CNC lathe is what you need. CNC machining applications are practically endless, which means you can offer a wider selection of products and parts than you currently offer. 

Typical industries that use CNC Lathe technology

CNC lathes are commonly used in a wide range of industries, including: 

• Woodturning 
• Metal spinning 
• Part reclamation 
• Thermal spraying 
• Metalworking 

Partner with TDB Specialists for Your Next Project

TDB assistants allow for faster and more precise metal components and product forming. We engaging in improving our working processes to leverage high-quality CNC hydraulic press brakes. Experienced manufacturing will quickly form and shape of required parts with incredibly tight resistance to meet your specifications.

Conclusion

CNC in general and CNC Lathe as an individual is a revolution and introducing a new aspect of species machining.

This article reviewed the definition and superiority of CMC Lathe machining. To learn more about CNC machining and how you can use it for your projects, contact a TDB representative at contact@tdbist.com.